September 4th, 2013

Concertina

Veneer Flattening

My concertina would originally have had solid Indian rosewood ends with a fancy fretwork pattern cut out of them (to let the sound out). At some point they have been lost (they probably split and fell apart - apparently quite a common fault) and somebody has replaced them with aluminium sheets with holes drilled in them. Although functional, they are far from attractive, so I want to make a new pair of wooden ends. The big question was what kind of wood to make them from? A chap who has restored several concertinas, including making new ends, advised me that it's a good idea to use a high-quality hardwood laminate (several thin layers of wood glued together with the grain of alternate layers running at right angles to each other) rather than solid wood, to avoid the problem of them potentially splitting again in the future. I've seen a photo of a very fancy original antique Lachenal concertina that has laminated ends, so it seems the idea has historical precedence too. I suspect they didn't routinely use laminates for the ends because it's a much more labour-intensive and expensive process.

The next big question was what wood to make the laminate from. One option would have been to make all but one layer from something fairly cheap and use something fancy (e.g. a pretty burr) for the visible outer veneer. After much searching and calculating and debating (with myself) I opted to get a long strip of Indian rosewood and use that for every layer. That way the end result should look fairly close to the original, providing you don't peer too closely at the edges. I could in theory veneer the edges too, though the shape might make that rather tricky and it would still be possible to see the laminations on the inner edges of the fretwork piercings. Collapse )

Time spent so far on cutting and flattening the veneers: about 3 hours.